6.
Press Slope repeatedly to select the trigger slope, rising or falling
edge.
Range
7.
Press Coupling repeatedly to select the trigger coupling, DC or AC.
Range
8.
Press Rejection to select the frequency rejection mode.
Range
9.
Press Noise Rej to turn the noise rejection on or off.
Range
10. Press Previous menu to go back to the previous menu.
5.7.5 Configuring the Video Trigger
Procedure
1.
Press the Trigger menu key.
2.
Press the Type key repeatedly to select the video trigger. The
video trigger indicator appears at the bottom of the display.
3.
Press the Source key repeatedly to select the trigger source
channel.
Range
4.
Press Standard repeatedly to select the video standard.
Range
5.
Press the Polarity key repeatedly to select the video signal
polarity.
Range
11-2011
Rising edge, falling edge.
DC, AC
LF, HF, Off
On, Off
Channel 1, 2
PAL, NTSC, SECAM.
Positive, negative.
USER'S MANUAL. OD-405/410B/411/415
Page 72