Saving The Display Image - Promax OD-405 Manual De Instrucciones

5. Press Destination repeatedly to select the file destination. Use the
variable knob to select the memory location.
Memory: Internal memory, W1~W15.
USB (OD-405/OD-410B): Save to the USB flash drive with a 4k
waveform memory length.
USB Normal (OD-411/OD-415): Save to the USB flash drive with a
4k waveform memory length.
USB 1M (OD-411/OD-415): Save to the USB flash drive with a 1M
waveform memory length. For 2 channel operation only.
USB 2M (OD-411/OD-415): Save to the USB flash drive with a 2M
waveform memory length. For single channel operation only.
Ref: Internal reference waveform, A/B.
6. Press Save to confirm saving. When it is completed, a message
appears at the bottom of the display.
NOTE: The file will not be saved if the power is turned off or the USB
flash drive is removed from the USB port.
It takes approximately 1 min to save a 2M waveform to the
USB drive in fast mode. Detailed mode may take over 10 times
longer depending on the speed of the USB flash drive.
File utilities
To edit the USB drive contents (create/ delete/ rename files and folders),
press File Utilities.

5.11.3 Saving the display image

Saving the display image can be used as a screen capture or it can be
used as a reference waveform.
Procedure
1. Insert the USB flash drive into the front panel USB port. (Image files
can only be saved to USB).
11-2011
USER'S MANUAL. OD-405/410B/411/415
Page 86