Axonics 2501 Manual Del Instrucciones página 46

Viewing the Status of a Stimulator
1
4
42
5
3
2
6
Active Therapy ( 3 ): This area shows the current stimulation
settings for the therapy programmed to the Stimulator .
The active therapy program is indicated by a colored box around
the settings for that program .
Additionally, the active stimulation settings can be adjusted in
the Stimulation Control module ( 4 ) . This area is intended for
basic adjustments to the stimulation being delivered . It is not
intended for reprogramming .
Controls in this module include:
"Stimulation Level": Increase or decrease the stimulation
amplitude .
"Stimulation": Turn stimulation on or off . If stimulation is
turned on, it will come on at the stimulation level shown
below the "Stimulation" button .
"Reset": Puts the Trial Stimulator in hibernation and erases
all data on the Trial Stimulator .
Note: The CP, including this button, cannot be used to bring a device
out of Hibernate Mode . For more information see the following manual
section on Resetting the Stimulator .
Additional information can be accessed via the "Therapy
History" ( 5 ) tab on the Patient Device screen . Detailed usage
data is available by pressing the [
Note: The "Threshold Detail" tab is only present for tined lead trials .
] icon ( 6 ) .