Axonics 2501 Manual Del Instrucciones página 56

Programming the Stimulator Stimulation Settings
52
To adjust ramping:
Ramping settings are active when settings have been set to
•
the Stimulator .
Note: The ramping settings are not active during test stimulation . To test
ramping, save the stimulation settings to the Stimulator by pressing "Set
Device Therapy" .
Press the button for the parameter and a pop-up will appear
•
for adjusting the ramping setting .
Allows stimulation to ramp up and down between zero
•
amplitude and the targeted stimulation amplitude when
stimulation turns on and off .
Ramping time can be programmed at "Off", 1, 2, 4, 8, 15,
•
or 30 seconds .