Operating The Robot; Charging The Robot - Amibot Swip AS70 Manual Del Usuario

Operating the robot

Charging the robot

Assembling the home base and charging the robot
Plug in the home base using the power cable.
NOTE: AMIBOT Swip AS70 does not recharge automatically. You need to manually
position the robot on its home base so that it will start charging.
Place the robot on its home
base. The battery
light is red when the battery
needs charging. The indicator
light turns off when the robot's
battery is fully charged.
NOTES:
• Before using the robot for the first time, you must charge it for at least 12 hours.
It will need to be charged for around 300 minutes thereafter.
• If the robot is not used for a long period of time, you are recommended to fully
charge the battery, switch off the robot and store it in a cool, dry place.
indicator
9
EN