Gap And Power Sensors; Main Brush And Squeegee - Amibot Swip AS70 Manual Del Usuario

EN
Maintenance

Gap and power sensors

The gap and power sensors on the bottom of the robot and on the
home base must be regularly cleaned with a soft cloth. Never let the
sensors get wet.

Main brush and squeegee

Unclip the main brush from its unit. Clean the cavity using a soft
cloth and run the main brush under clean water. Wait until it is fully
dry before putting it back.
Run a dry cloth over the squeegee
to remove accumulated debris.
NOTE: The main cleaning brush can be
hand-washed for better results.
18