Amibot Swip AS70 Manual Del Usuario página 16

EN
Operating the robot
SPOT mode
0.8 m
0.8 m
This mode is the most effective when cleaning a specific area. Press
the MODE button on the robot and select the SPOT mode. The SPOT
mode indicator light is green on the robot display screen. Then press
the CLEAN button on the robot and the cleaning cycle will start. The
SPOT mode can also be activated using the remote control. Once
the area is clean, the robot returns to its starting point and stops its
cycle.
EDGE mode
The EDGE mode is ideal for cleaning along walls and in corners.
Press the MODE button on the robot and select the EDGE mode.
The EDGE mode indicator light is green on the robot display screen.
Then press the CLEAN button on the robot and the cleaning cycle
will start. The EDGE mode can also be activated using the remote
control. The robot moves in straight lines, along walls and furniture
in the room. When the robot has cleaned along all of the walls in the
room, it stops its cycle.
NOTES: Before the robot starts its EDGE cleaning cycle, place the robot facing the
wall and remove any obstacles along the wall.
14