EdilKamin MAXIMA 14 Manual De Instalación, Uso Y Mantenimiento página 86

USER MANUAL FOR THE DOMOKLIMA
GRAPHICA CONSOLE
SETTING THE LANGUAGE
To set the language:
- from the HOME screen, press any key and then the menu key,
select CONSOLE and confi rm the
selection with the enter key
C O N S O L E
B O I L E R
C A L D A I A
ESC
Select LANGUAGE and confi rm with the enter key
S E A S O N
S T A G I O N E
C L O C K
O R O L O G I O
L A N G U A G E
ESC
The console language setting screen is then available; select the
desired language by pressing the keys + and confi rm with the
key:
L A N G U A G E
I T A L I A N O
ESC
after setting the language, press ESC repeatedly until the
HOME screen appears.
The following languages are available: Italian, English, French,
Spanish, German, Danish, Greek, Dutch and Portuguese.
HOME SCREEN
The HOME screen sums up and lets you check the function-
ing settings. Commands to switch on, switch off, change
temperature and timetable programming can be issued from
the console. It is also possible to display the temperature of
the output water, the set functioning temperature, the working
power selected by the system, and the various ignition, work,
stand-by or block phases.
INSTRUCTIONS FOR USE
:
:
=
- 86
Screen display
Screens other than HOME can be displayed by simply selecting
that of interest; the console maintains the last screen selected.
In the case of an electricity outage, the console returns auto-
matically to the HOME screen.
If you wish to stop the periodic display of the date and time,
showing only the state of the boiler on the HOME screen:
- go to the HOME screen and then simultaneously press the
fi rst key on the right and the fi rst on the left, press the two end
keys of the keyboard while the boiler state is shown on the
screen (press quickly and in together, otherwise the command
will not be recognised);
- to reactivate showing the date and time, press the two end
keys of the keyboard again.
THERMOSTAT FUNCTION
The console not only lets you remotely control the boiler, it can
also be connected to it and function as a zone thermostat, man-
aging the power modulation or the ignition/shut-off according
to a set environmental temperature (the parameters need to be
set to make the boiler function, in POWER-MODULATION
mode or in ON-OFF mode, to be set by the technical assistance
centre).
Pressing any key of the console will give access to the internal
thermostat setting, press the + and - keys to set the desired SET
temperature in the environment.
T E M P E R A T U R E
T E M P E R A T U R A
R O O M
A M B I E N T E
S E T
ESC MENU
CHRONOTHERMOSTAT FUNCTION
The console not only lets you remotely control the boiler, it
can be connected to it and function as a zone chronothermostat,
managing the power modulation of the ignition/shut-off ac-
cording to a set environmental temperature and the programme
timetable settings. The boiler parameter functioning modes can
be set as POWER MODULATION mode or ON-OFF mode;
settings to be entered by the technical assistance centre.
in ON-OFF mode the console programming disables program-
ming from the control panel.
In POWER MODULATION mode the console resets the
comfort and economy system as described below (the boiler
modulates its functioning to maintain the desired temperatures
and prevents switch-off.
If you wish to switch the boiler off, set the ON-OFF phases
from the control panel as described on the previous page. To
use the chronothermostat, it must be enabled; from the HOME
screen, press any key, then press the menu key, select CON-
SOLE, confi rm by pressing the enter
B O I L E R
C O N S O L E
C A L D A I A
ESC
-
° C
= 1 8 . 0
= 2 0 . 0
key: