Hand Control Use; Changing The Display Language; Switch On/Off; Start / Stop / Reverse Function - Kinetec Spectra XL Manual De Empleo

9.

Hand control use

9.1. Changing the display language

Beginning
Switch the unit on
Press simultaneously on the 2 keys
To change the language
To confirm the new language

9.2. START / STOP / REVERSE function

As with all Kinetec
®
functions.
Press the key of the hand control. The movement stops,
Press the key of the hand control. The movement starts in the opposite direction.
For optimum safety, always give the hand control to the patient before starting the system.
Procedure to stop the machine:
To stop the machine's movement: press the [stop] button,
To switch power off: press the ON / OFF switch (9) (see page 7)

9.3. Locking the hand control setting

The hand control allows the patient to control the machine as appropriate.
Simultaneously press the
The display reads "LOCK", you cannot change the parameters; if you try the message
LOCK will be displayed. The Start and Stop keys are still active.
To unlock the hand control, simultaneously press the same keys. The display will show UNLOCK.
We recommend that you lock the hand control when you give it to the patient.
Note: the hand control locking is preserved when you switch the unit ON/OFF.
Kinetec Spectra XL™
Keys to
press
Or
systems, the devices Kinetec Spectra XL™ are equipped with ON/OFF/REVERSE
and
Display
KINETEC
40 STOP
LANGUAGE
ENGLISH
LANGUAGE
FRENCH
OK

SWITCH ON/OFF

CAUTION
keys to lock the hand control.
EN
Check if the hand control is not
50 110
locked (See page 7).
The display indicates the language
selected.
The French language is selected.
Available languages: English, French,
German, Italian and Spanish.
Switch the machine off
and then on again
to apply the changed
display language.
Remarks
7/20