10. Using the Plastic Comfort Case kit
Plastic Comfort Cases are specially designed to improve comfort and hygiene for the patient. They have
clips, fixed directly on the tubes of the machine's thigh and lower limb support segments, and straps with
protection stops to precisely and quickly adjust to the patient's leg dimensions.
Cleaning
To ensure optimal hygiene, clean the supports after each patient use.
Use a DISINFECTANT product (alcohol-free or <5% alcohol solution) in spray (plastic cases and metal
components).
(See the Maintenance chapter page 15 for the running time counter).
Replacement parts
a
4670024048 Complete foot support
b
4635010561 Foot support strap kit
c
4635010719 Tibia case only
d
4670024527 Tibia case with straps
e
4635010727 Femur case only
f
4670024535 Femur case with straps
g
4650001876 Single strap
Part number to order a complete kit:
-
fastening with clips: 4670025385
-
fastening without clips: 4670024519 (if your
machine is not fitted with clips).
11. Using the Kinetec
The Kinetec
Patient Pad Kit is designed for rapid fitting, optimal hygiene and maximum patient comfort.
®
- Please refer to the instructions below for using and positioning the straps. Make sure that the self-
adhesive parts (26) are visible.
- Place the sponge side next to the skin.
FOR OPTIMAL HYGIENE, A NEW SET OF PADS SHOULD BE USED FOR EACH PATIENT.
CLEANING:
- Disinfecting the pads: Wash at 30°C, using a disinfectant solution during the rinse cycle. Examples of
products that can be used: Solution "Baclinge" at 0.125 % or "Souplanios" at 0.125% from ANIOS
Laboratory. A complete list of distributors in your country is available on request.
The device Kinetec Spectra XL™ is delivered with a complete set, comprising:
- 4 straps (4650001826)
- 1 foot support (4650001420)
- 1 cover (4650001834)
Kinetec Spectra XL™
We recommend changing the cases every 500 hours of operation.
Patient Pad kit
®
Each cover is provided with a label to record the patient's name
26
a
b
g
EN
c
d
e
13/20
f