Saeco Intelia Deluxe HD8904 Manual De Instrucciones página 26

English
26
The filter does not fit.
There is water under the
machine.
You placed the AquaClean filter
after having used the machine
for a while.
You did not activate the
replacement filter in the machine
menu.
You did not replace the filter
when the filter symbol started
flashing.
You need to remove air from the
filter.
There is still water in the water
tank.
You try to install another filter
than the AquaClean filter.
The drip tray is too full and
overflowed.
The machine is not placed on a
horizontal surface.
Note: If you are unable to solve the problem with the information in this
table, contact the Philips Saeco hotline.
Let air bubbles come out of the filter.
Empty the water tank before you
install the filter.
Only the AquaClean filter will fit.
Empty the drip tray when the drip tray
full indicator pops up through the drip
tray. Always empty the drip tray before
you start descaling the machine.
Place the machine on a horizontal
surface so that the drop iray full
indicator works properly.