AQUACLEAN
AQUA
FILTER?
CLEAN
AQUA
INSTALL
CLEAN
FILTER
6 Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
7 Insert the small plug into the socket located on the back of the machine.
Insert the mains plug into the wall socket.
8 Attach the automatic milk frother to the hot water/steam dispensing
spout.
9 Place a container under the hot water/steam dispensing spout.
10 Press the STANDBY button to switch on the machine.
11 Press the OK button to start the automatic circuit priming cycle.
12 The machine heats up and the display shows the temperature icon.
- The machine performs an automatic rinsing cycle.
13 The display shows the following icon to indicate you have to install the
AquaClean filter.
Note: If you want to install the AquaClean filter afterwards, press the ESC
button and continue with the manual rinsing cycle. For installation, see
chapter 'AquaClean filter'.
14 Press the OK button. The display shows the following icon.
15 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
English
9