In-Line 3 Amp Battery Fuse - Generac GP5000 Manual Del Propietário

Operation
3.11.1— In-line 3 Amp Battery Fuse
See Figure 3-13. To protect the battery, a 3 Amp in-line
fuse is located just above the starter motor.
To replace the fuse, proceed as follows:
Using a small flat blade screwdriver, gently pry
1.
apart halves of fuse holder to disengage latches.
Remove fuse.
2.
Install new fuse of the same type and rating.
3.
Press halves of fuse holder together to engage
4.
latches.
16
Figure 3-13. Battery Fuse
Owner's Manual for Portable Generator