Faema BARCODE NEW TOUCH Uso E Instalacion página 85

MESSAGE POSSIBLE CAUSES: when the message is visualized
Softener This message is displayed when the softener resins
need to be regenerated. (Follow the instructions on sof-
tener maintenance).
Machine in This message is displayed when the machine switch
stand-by ON/OFF has been programmed. The message indicates
that the machine is switch-off and is in stand-by status.
Blocked key During normal use of the machine, sometimes a key may
become mechanically blocked. If this happens and the key
remains blocked for more than 1 minute, this message will
appear on the display screen: Blocked key.
Note: All other keys except the one involved will function
normally.
Messages
about
washings
Messages in explicit mode
33 EN
VERIFICATIONS
Once regeneration has been completed,
keep the RESET key pressed for
mately 8 seconds to cancel out the mes-
sage.
Refer to the Technician's Manual to see
how to program the switch ON/OFF of the
machine.
Press the key for a few seconds
RES (24)
to force the machine on.
To solve the problem, examine the keypad,
identify the blocked key that caused the
message, and follow the steps needed to
remedy the situation.
Please consult this manual at the "Cleaning
operations ".
approxi-