Zhermack VAP 6 Manual De Instrucciones página 141

MAINTENANCE AND USE MANUAL
The equipment is not supplied with gloves or protective glasses; however, the
operator must be in possession of these items in order to utilise the equipment.
Should it be necessary to move the equipment proceed as follows:
1. disconnect the equipment from the mains power supply;
2. if necessary, empty the boiler (see section 8.3.1);
3. disconnect (for VAP 6A) the water softener hose (if any) from the water inlet connector (29);
4. disconnect the other softener hose from the water supply tap;
5. grip the unit by the base, making sure you hold it vertically. Proceed cautiously, bearing in mind the size
and weight of the unit (see section 4.2.2), so as to prevent any accidents that might be caused by failure to
evaluate such factors.
6. Pack the equipment in its original box or, if this is not possible, take all the necessary
precautions to protect the equipment against knocks or drops, in that the goods are transported at the
owner's risk.
Failure to observe the above exonerates the Manufacturer from any liability
concerning equipment malfunction and consequently renders the Warranty null
and void.
When shipping/delivering the equipment to your Authorised Servicing Centre
always enclose a copy of the purchase document and a copy of the properly
compiled ID form.
If the equipment is to be transported by courier, the postal service or rail it is
recommended such shipments be insured.
When disposing of the packaging materials the user must comply with the standards in force in his/
her country regarding the following materials:
• Wood/paper: non-polluting materials, but must be recycled properly.
• Polystyrene/plastic: pollutants which must not be burnt (toxic fumes) nor dispersed into the
environment, but disposed of in compliance with the standards in force in the country of use.
If the equipment is to be dismantled the user must, in compliance with EC directives and the laws in
force in the country of use, effect elimination and recycling of the following materials:
• Plastic and glass parts, insulated electrical wiring, rubber parts.
• There are no toxic or corrosive parts.
This product must not be disposed of as household waste but rather, when no
longer used, must be collected separately according to UE Directive 2012/19.
VAP 6 / 6A - AD 8
EN
TRANSPORT AND MOUNTING
DISPOSAL / DISMANTLING
5.3
5.4
141 of 328