Routine Maintenance - Zhermack VAP 6 Manual De Instrucciones

Ocultar thumbs Ver también para VAP 6:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 165
MAINTENANCE AND USE MANUAL
The equipment exterior can normally be kept clean just by wiping it with a dry cloth. If necessary, wet
the cloth just a little water or use a non-degreasing detergent (see section 2.4).
The operator must ensure that the equipment is kept clean and free from any foreign bodies such as
dirt, water, non-conducting liquids etc.
Cleaning should be carried out at the end of every work session and must be done with the
equipment switched OFF and stable.
If you need to clean the interior of the unit contact an Authorised Service Centre.
Before cleaning the equipment exterior always turn the main switch to OFF. It is
strictly forbidden to clean the equipment while it is connected to the mains power
supply.
Never use inflammable, corrosive, alkaline or toxic liquids when cleaning the equipment.
Eye goggles and a face mask must be worn when using compressed air for cleaning
purposes. Do not allow any persons near the equipment as they could be hit by flying
dust.
Once the equipment has been cleaned (see section 8.1) the operator must check for worn, damaged
or loose parts. If any such anomalies are discovered contact your Authorised Servicing Centre.
Should any of the above anomalies be discovered it is strictly forbidden to restart the
equipment before such faults have been set right.
More precisely, should the operator note any defects or problems of any kind whatsoever he/she must
place a warning sign on the equipment indicating that maintenance work is in progress and that using
the equipment is forbidden (EC-compliant signs can be purchased from the relevant suppliers).
Routine maintenance, cleaning and proper equipment use are essential factors in guaranteeing long-
lasting equipment performance and safety.
Equipment safety devices/guards must never be removed except for repair and
maintenance purposes.
Such items must be replaced as soon as the situation which led to their removal no
longer exists and in any case before the equipment is used again.
VAP 6 / 6A - AD 8
EN
CHAPTER 8: MAINTENANCE
CLEANING

ROUTINE MAINTENANCE

8.1
8.2
153 of 328

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vap 6aAd 8

Tabla de contenido