Zhermack VAP 6 Manual De Instrucciones página 147

MAINTENANCE AND USE MANUAL
Fig. 16: Switch on pump and element by acting on
switch (4); the LED on the switch comes on, the "water
low" warning light (6) comes on and the pump starts
working.
It is advisable to install a tap between the mains water supply and the water inlet
hose of the softener so that the water flow can be closed off if necessary.
Failure to observe any of the above installation instructions may lead to
malfunctions and render the warranty null and void.
VAP 6 / 6A - AD 8
EN
16
Figure
147 of 328