Dipswitch For Time Mode Settings; Stripping The Cable; Disassembly - Speck pumpen BADUJET Vogue Instrucciones Para El Manejo

5.5.3

Dipswitch for time mode settings

Fig. 27
5.5.4

Stripping the cable

The cable for the power supply should be stripped to a length

of 15 – 17 cm.
5.6

Disassembly

1. Loosen cable screw (20).
2. Loosen air regulator (21/1) by turning it anti-clockwise.
3. Unlock and remove pneumatic button (38/1; 38/2) by turning
it anti-clockwise.
4. Unlock cover (113). See "Fig. 20" on page 33.
5. Loosen screws (112) and remove lighting cover (110).
6. Loosen screws (49) and remove stainless steel cover (93).
7. Loosen screws (95) and remove suction housing (107).
8. Loosen screws (52) and remove support ring (28) and
support ring seal (27).
03|2020
Installation
EN 41