Assembling The Dummy Plate - Speck pumpen BADUJET Vogue Instrucciones Para El Manejo

Fig. 28
6.3.2

Assembling the dummy plate

The following steps are necessary in order to assemble the
dummy plate:
1. Observe the point "Disassembly" on page 41.
2. Attach the dummy plate (30) under the support ring (28) and
fasten it to the main housing (1) using four tapping screws
(103). See "Fig. 12" and "Fig. 13" on page 26.
03|2020
Commissioning/Decommissioning
EN 45