Counter Swim Unit Electrical Connection - Speck pumpen BADUJET Vogue Instrucciones Para El Manejo

Installation
5.4.1

Counter swim unit electrical connection

 The circuit is wired ready for connection. The connections
are carried out in accordance with the wiring diagram.
 Connect the pneumatic hoses of the pneumatic buttons with
the control box.
 The control box may only be mounted to the existing holes.
Connection onsite:
• Ground fault circuit interrupter I
• Fuse 1-phase 230 V/3-phase 400 V safety fuse 16 A slow or
16 A circuit breaker.
• Short circuit breaking capacity I
• All-pole emergency off switch with 0 and 1 labelling.
 A connection has to be provided for equipotential bonding,
that is connected with the earthing strap.
Further information is provided in the connection diagram. The
above-mentioned parts are not included in delivery and must be
provided on site for the installation of the unit.
36 EN
≤ 30 mA
FN
≤ 6 kA
CN
03|2020