Speck pumpen BADUJET Vogue Instrucciones Para El Manejo página 106

Faults
7 Faults
NOTICE
It is normal for a few drops of water to escape from the
mechanical seal from time to time. This is especially true during
the break-in period.
Depending on the water quality and number of operating hours,
the mechanical seal can begin to leak.
If water leaks constantly, have the mechanical seal replaced

by a qualified technician.
NOTICE
We recommend first informing the swimming pool contractor if
there are irregularities.
7.1 Overview
Problem: Pump is switched off by the built-in or external overload
switch.
Possible cause
Overload.
Media temperature too high.
Problem: Pump seizes.
Possible cause
Mechanical seal is stuck.
Problem: Pump leaks.
Possible cause
Mechanical seal is worn or
damaged.
46 EN
Solution
 Check pump. See point
7.1.1 on page 47.
Wait for the motor winding

to cool down and the
motor protection to turn
back on.
 Reduce the media
temperature.
Solution
 Turn the motor shaft. See
point 6.1.1 on page 42.
 Clean pump and pump
parts.
Solution
 Have a professional
replace the mechanical
seal.
03|2020