Installation Example; Installing The Pump And Connecting It To The Pipework - Speck pumpen BADUJET Vogue Instrucciones Para El Manejo

Installation
5.3.1

Installation example

Fig. 22
5.3.2

Installing the pump and connecting it to the pipework

1. Fasten the pump horizontally on a vibration-absorbing base.
NOTICE
The pump can be damaged by unauthorised mechanical strains
being placed on the pump!
 Take the pipe up directly before the pump and connect it free
of tension.
2. Connect the pipe free of tension according to the VDMA
standard sheet 24277. Use compensators if necessary.
3. Ensure that any leaks cannot cause consequential damage.
Install a suitable retainer if necessary.
4. There must be ground drainage
 Calculate the size of the ground drain according to the
following criteria:
– Size of the swimming pool
– Circulation flow rate
34 EN 03|2020