gala gar Smart Tig 310 PACDC Manual Técnico De Instrucciones página 36

2. GENERAL DESCRIPTION.
This is a digital AC/DC inverter welding machine with perfect function, excellent performance and advanced
technology. It has various AC/DC non-melting inert gas welding function such as AC square-wave TIG, AC pulsed
TIG, DC TIG, DC pulsed TIG, AC SMAW, DC SMAW, TIG spot welding (DC, pulsed or AC), and composite
waveform TIG, etc., and it can be widely used in fine welding of various metals.
The foresighted design and advanced and mature technologies of this machine would protect users' investment to
the maximum extent.
2.1 Advanced digital control
This machine adopts advanced MUC intelligent digital control technology, and all its major parts are performed
through software. It is a digital control welding machine, improved a lot in its function and performance when
compared with the traditional welding machine.
2.2 Advanced inverter technology
The primary inverter frequency is 100 KHz, which greatly reduces the volume and weight of the welder. Great
reduction in magnetic and resistance loss obviously enhances the transformer efficiency and energy saving effect.
Working frequency is beyond audiorange, which almost eliminates the noise pollution.
2.3 Perfect automatic protection function
When the mains voltage fluctuates sharply, the welding machine will automatically stop working with the fault
information displayed, and it will automatically recover after the mains voltage turns stable. Besides, in the case of
overcurrent or overheating, the machine will stop working automatically with the fault information displayed. Such
protection function greatly increases the lifespan of the machine.
2.4 Good consistency and stable performance
This machine adopts intelligent digital control, so it is insensitive to the change of parameters of components. That
is, the performance of welding machine will not be affected by the change of the parameters of certain
components. Besides, it is insensitive to the change of the working environment such as temperature and humidity,
etc. Therefore, the consistency and stability of digital control welder is better than that of traditional welder.
2.5 Parameter easy to adjust and software easy to update
Generally speaking, for a welding machine with analogue circuit control or with analogue circuit & digital circuit
control, the adjustment of most parameters should be achieved through the corresponding circuit, so if more
parameters to be adjusted, the circuit would be more complicated and more difficult to be achieved. However, for a
welding machine with intelligent digital control, the adjustment of parameters is much easier and more accurate,
because its main function is achieved through software. To change the function or some of the parameters, you do
not need to change the circuit, and the only thing you have to do is to download the updated software.
2.6 User-friendly interface
This machine adopts international standard graphic language interface, which is simple, vivid, intelligible, and
convenient for users' operation.
Smart Tig 310 P ACDC
Magnetic fields affect cardiac pacemaker.
Pacemaker users should be away from the welding spot before medical

consultation.
Moving parts may lead to personal injury.
Keep yourself away from moving parts such as fan.

All doors, panels, covers and other protective devices should be closed

during operation.
Please seek professional help when encountering machine failure.
Consult the relevant contents of this manual if you encounter any

difficulties in installation and operation.
Contact the service center of your supplier to seek professional help if

you still can not fully understand after reading the manual or still can not
solve the problem according to the manual.
Pág. 36