gala gar Smart Tig 310 PACDC Manual Técnico De Instrucciones página 49

Push the torch trigger.
Push the torch trigger and then release it at
any time.
Push and release the torch trigger within
0.5s, or release and push the torch trigger
within 0.5s.
Mode no.
Follow mode:
③ Push the torch trigger: arc is ignited and current rises to
the preset value.
④ Release it: arc stops.
1T/Spot welding mode:
③ Push the torch trigger: arc is ignited and current rises to
the preset value.
④ When the spot welding time is up, current drops
gradually, and arc stops.
Note: Spot welding time is 1/10 of the upslope time.
Standard 2T mode:
④ Push the torch trigger: arc is ignited and current rises
gradually.
⑤ Release the torch trigger: current drops gradually, and
arc stops.
⑥ If push the torch trigger again before arc stops, the
current will gradually rise again, and then turn to ②.
Double operation 2T mode:
④ Push the torch trigger: arc is ignited and current rises
gradually. The torch trigger can be released at any time.
⑤ Push it again: current drops gradually, and arc stops.
The torch trigger can be released at any time.
⑥ If push the torch trigger again before arc stops, the
current will gradually rise again, and then turn to ②.
Smart Tig 310 P ACDC
Torch trigger operation notes
TIG operation modes
Operation
Release the torch trigger.
Release the torch trigger and then push it at
any time.
Push the torch trigger twice within 0.5s, or
release the torch trigger twice within 0.5s.
Torch trigger operation and current curve
Pág. 49