Control Setting - Gima SP-10 Manual Del Usuario

16
ENGLISH
a. OTHER PARAMETERS
Press "Other Par" in main menu to its sub-menu as Figure 6-7 which displays other parameters except for the
three parameters in main menu (see following for details), press confirm key to return to the main menu (press
"Up", "Down" key in this interface is no effect).
Figure 6-7.
b. CONTROL SETTING
Press "Control Setting" in main menu interface to its sub-menu as Figure 6-8, then the relative operations can
be done.
1) Trend Curve
Select "Trend Curve" to the determinant interface of trend curve as Figure 6-9. Press "Up" or "Down" key to select
the determinant value, then press the confirm key to the trend curve interface as Figure 6-10 which gathers all data
in current and displays the variational trend visually, which is convenient for user to contrast the data.. If the data
is too much, then press "Up" or "Down" key in curve interface to browse all data trend curves orderly. Press the
confirm key to exit the current interface, return to the control setting interface (as Figure 6-8).