Gima SP-10 Manual Del Usuario página 54

18
ENGLISH
Attention: Open the review function can browse all measured data, the path is:Enter the main menu as Figure 6-6,
select "Patient Info", press the confirm key to enter its sub-menu as Figure 6-20. Select "Number", then press the
confirm key to case number interface as Figure 6-11 (The function only can be selected in case of opening the
review function), then use "Up" or "Down" key to select case number, press the confirm key to browse the cor-
responding information. If you want to browse other cases, then repeat the above steps (If the case data is error,
then it will display "Error!" after pressing the confirm key).
3) Denote Value
Select "Denote Value" to its sub-menu, press confirm key to choose which one to decide the denote value (as
Figure 6-13, the denote value is decided by the ratio of FVC and predicted value), after selected, press confirm
key to exit the interface (Note: the state value is a percentum which was decided by the ratio of measured value
and predicted value).
Figure 6-12 Figure 6-13
4) Delete Data
Select "Delete Data" to its sub-menu as Figure 6-15, select "Yes" to delete all the data, and display "waiting...",
then return to "Control Setting" interface as Figure 6-14, in the case of this state, exit in turn until to the interface
as Figure 6-1, then you can continue testing. Select "No" to exit directly to the interface as Figure 6-14.