Threading The Lower Looper - Janome MyLock 734D Libro De Instrucciones

Janome 734D Instruction Manual
o
i
u
(A)
1
2
3
www.toews.com
38
q
w
e
!0
r
t
y
q
(B)
w
e

• Threading the Lower Looper

Open the looper cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the right side thread
guide from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
q
Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
q
Thread guide plate
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
e
Lower looper thread tension dial
734D Owners Manual/ User Guide
Janome Serger 734D