Setting Parameters - Stalgast 803020 Instrucciones De Uso

4. Up arrow
5. Stop button
4. Displays
19
- display 1 - indicates the temperature of washing and steaming; duration of the cleaning
cycle C1 - C2 - C3, and alarms E1, E2
22
- display 2 - indicates the temperature of washing and E-errors
5.

Setting parameters

After first pressing
Use arrows
factory-set password.
a. Programming temperature and duration
CLIENT SETTINGS
Press . again. The displays will show the data:
- steam - rinse temperature (70-95
Use arrows
Press . again. The displays will show the data:
- water temperature for washing (40-70
Use arrows
SERVICE SETTINGS (Recommended not to change)
Press . again. The displays will show the data:
- increase wash or rinse temperature and increase the
duration of the wash or rinse cycle. C1-90 sec. C2-120 sec.
C3-180 sec.
- turns the appliance off (does not shut off the power,
complete shut-down occurs once the plug is pulled out of the
socket or the main switch is turned off, the so-called PLANE),
stops the wash or rinse cycle.
the display will show
P.1. 9.0.
to modify the data on display 2 on
P.2. 6.0.
P.3. 8.2.
o
C)
to change the temperature on display 2.
o
C).
to change the temperature on display 2.
- 39 -
0.0. P.4. 2.0.
0.0.
.
0.1. P.5. 1.5.
0.1.
c.1.
P.1. 9.0.
c.2.
0.0.
P.2. 6.0.
c.3.
0.1.
P.3. 8.2.
P.1. 9.0.
0.0.
P.2. 6.0.
0.1.
P.3. 8.2. P.1. 9.0.
0.0.
P.2. 6.0.
0.1.
P.3. 8.2.
P.1. 9.0.
P.2. 6.0.
P.3. 8.2.
P.4. 2.0.
P.5. 1.5.
. This is the
c.1.
P.4. 2.0.
c.2.
P.5. 1.5.
c.3.
c.1.
P.4. 2.0.
c.2.
P.5. 1.5.
c.3. c.1.
P.4. 2.0.
c.2.
P.5. 1.5.
c.3.
c.1.
c.2.
c.3.