Safety Precautions; Rotating Parts - Kohler KD625-2 Uso-Manutencion

To ensure safe operation please read the following statements and understand their meaning. Also refer to your equipment manufacturer's manual for other
important safety information. This manual contains safety precautions which are explained below.
WARNING Warning is used to indicate the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTIoN Caution is used to indicate the presence of a hazard that will or can cause minor personal injury or property damage if the caution is
ignored.
NoTE This indicates particularly important technical information that should not be ignored.
WARNING
Accidental Starts can cause
severe injury or death.
Disable engine by disconnecting
negative (-) battery cable.
Accidental Starts!
Disabling engine. Accidental starting
can cause severe injury or death.
Before working on the engine or
equipment, disable the engine as
follows: 1) Disconnect negative (-)
battery cable from battery.
4

SAfETy PRECAUTIoNS

WARNING
Rotating Parts can cause severe
injury.
Stay away while engine is in
operation.

Rotating Parts!

Keep hands, feet, hair, and clothing
away from all moving parts to
prevent injury. Never operate the
engine with covers, shrouds, or
guards removed.
WARNING
Carbon monoxide can cause
severe nausea, fainting or death.
Avoid inhaling exhaust fumes, and
never run the engine in a closed
building or confined area.
Lethal Exhaust Gases!
Engine exhaust gases contain
poisonous carbon monoxide. Carbon
monoxide is odorless, colorless, and
can cause death if inhaled. Avoid
inhaling exhaust fumes, and never
run the engine in a closed building or
confined area.
WARNING
Hot Parts can cause severe
burns.
Do not touch engine while
operating or just after stopping.
Hot Parts!
Engine components can get
extremely hot from operation. To
prevent severe burns, do not touch
these areas while the engine is
running, or immediately after it is
turned off. Never operate the engine
with heat shields or guards removed.