Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY GUIDE (Continued)
Use Vacuum Lid when vacuum blending only.
Vacuum Lid Assembly
Underneath Vacuum Lid, make sure the Vacuum Plug is in place and
1.
screw Vacuum Cap up into Vacuum Lid clockwise until tight.
Line up red dot (located on top of Lid) with the handle.
2.
Push down on the Lid until it sits firmly in place.
3.
Make sure to turn the Release Valve to the Lock position before using
•
vacuum function.
Vacuum Lid will NOT open when in Lock position.
•
Owner's Manual
14
Vacuum Lid
Vacuum Plug
Vacuum Cap
Jar
Release Valve
Publicidad
