Publicidad
Idiomas disponibles
Idiomas disponibles
Before First Use:
Wash all removable parts in warm, soapy water or in the dishwasher, top rack
only. The Jar can be washed using the "Clean" function. See "Operating
Instructions" for details.
Jar
Pull down and remove the Vacuum Plug if cleaning is necessary. After part is
cleaned and dried, push the Vacuum Plug firmly back into place. Remember to
reattach Vacuum Cap before use.
Residue and moisture may build up inside Vacuum Cap and on Vacuum Plug.
Clean and dry thoroughly after each use.
Unscrew the Vacuum Cap counterclockwise, and hand-wash or clean in
dishwasher, top rack only. Make sure that the Vacuum Cap is screwed tightly
into place prior to use.
Removal of Lid Seal Ring may be necessary for cleaning or if the part
is worn, damaged, or needs replacing. To assemble:
1. Line the inside of the Lid Seal Ring into the rim.
2. Press the Seal Ring into the rim to ensure it is properly sealed.
3. Make sure the lower part of the Seal Ring lines up with the bottom side
of the rim.
CARE & MAINTENANCE
Vacuum Lid
Seal Ring
Vacuum Plug
Vacuum Cap
Plunger and
Vacuum Lid Rim
Plunger Cap
Plunger Lid
Seal Ring
Plunger
Seal Ring
Owner's Manual
19
Publicidad
