Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY GUIDE (Continued)
Jar Assembly with the Vacuum Lid
Lift the Vacuum Arm up.
1.
Place the Jar on Base by aligning it on top of the 4 Rubber Columns.
2.
The Vacuum Cap needs to be screwed tightly into place prior to use.
3.
Push the Vacuum Arm down and press on Lid until a connection is made and
4.
a "click" is heard.
Make sure the Release Valve is in Lock position before vacuuming.
5.
Before removing Vacuum Lid, turn the Release Valve to open position.
•
Make sure all parts are securely attached.
Switch
Vacuum Arm
CAUTION
Owner's Manual
4 Rubber Columns
15
Publicidad
