8
UK
Control unit
Type
Power feed
Outlet blinking light
Motor outlet
Aux. power-feed outlet
Operating temperature
Radio receiver
Storable radio codes
Box dimensions
Container
IMPORTANT NOTICE
The manufacturer reserves the right to introduce modifications without prior notice; the manufacturer
does not bear any responsibility for damage or injury caused by improper use or wrong installation.
Before installing and programming the control unit, carefully read this instruction manual.
• This instruction manual shall only be used by technical staff specialized in automation installation.
• No information contained herein may be of interest to final users.
• All maintenance or programming operation shall only be performed by skilled technical staff.
• AUTOMATION SHALL BE PERFORMED IN ACCORDANCE WITH CURRENT EUROPEAN STANDARDS:
- EN 60204-1 (Safety of Machinery, electrical equipments of machines, part 1: general rules).
- EN 12445 (Safety in use of power operated doors - testing methods).
- EN 12453 (Safety in use of power operated doors - requirements).
T1
D1
C1A
IC2
K2
K1
F1
M1
IN
M
220Vac
OPEN
CLOSE
LAMP
SR2
Single-phase electronic control unit
for the automation of rolling shutters
with on-board radio receiver
230 VAC 50-60Hz (5A Fuse)
230 Vac 40 W
230 Vac 1350 W max (relè 16A)
24 Vca 3 W max
-20 ÷ 70 °C
433.92 MHz rolling code
25
80 x 120 x 50 mm
ABS V-0 (IP55)
R3
IC1
C3
D2
R1
R4
C5
C6
R2
C1
C2
C2A
R7
R6 DIP-3
C4
S1
S2
MOD1
SEL
SET
C7
IC3
J1
K3
CN1
R5
R8
IC5
IC4
ANTENNA
M2
OUT
ANT
2AVAc
START
FOTOC
SR2