Mettler Toledo IND570 Manual De Instalación página 75

5. Place the cable in position for clamping, as shown in Figure 2-84. The folded shield wires
First clamp
6. Secure the cable assembly by inserting one clamp into the left slot, then rotating it down
7. Insert a screw into the hole in the clamp and tighten to secure the cable.
8. Follow the same procedure to secure the second clamp.
9. Connect the provided short black wire and the ring terminal on the black and drain wires from
2-42 METTLER TOLEDO IND570 Terminal Installation Manual
must be positioned under the first clamp to form a ground connection to the terminal chassis.
Figure 2-84: Securing the PowerMount Cable – Panel
around the cable.
Figure 2-85: PowerMount Cable Secured
the cable to the external ground stud with a hex nut.
Second clamp
30205319 | 11 | 07/2019