Mettler Toledo IND570 Manual De Instalación página 84

2.4.6.1.1. External Ethernet Adapter
Long-term connection to the optional Ethernet port installed on the main board can be made
through the available 25mm cable gland. If quick disconnect of an Ethernet connection is required
for an application, an optional Ethernet adapter kit can be installed on the harsh environment
terminal to make the Ethernet connection accessible from outside the harsh enclosure. The external
Ethernet connector is an M12 connector and can be used with METTLER TOLEDO cable part #
22017610 (M12 to Ethernet-RJ45)
THE EXTERNAL ETHERNET ADAPTER IS NOT CERTIFIED FOR USE WITHIN DIVISION 2 OR ZONE 2/22 HAZARDOUS
AREAS.
30205319 | 11 | 07/2019
Figure 2-96: Ethernet Option Installed on Main Board
Important: When installing either the Ethernet option, adhere the Ethernet label from the kit to
the rear panel of the panel-mount unit near the Ethernet connector. On the harsh enclosure,
adhere the Ethernet label to the main board cover near the Ethernet connector.
.
Installed M12 cable adapter
Figure 2-97: External Ethernet Adapter
NOTICE
METTLER TOLEDO IND570 Terminal Installation Manual
Ethernet
label
2-51