Mettler Toledo IND570 Manual De Instalación página 77

Figure 2-88: PowerMount Cable Installed in Panel Mount Terminal
2.4.5.10. PowerDeck Platform Connection
The PowerDeck home run cable can be equipped with a factory-installed connector, which attaches
to an M12 connector on the IND570 POWERCELL terminal. No further connection preparation is
required for the physical connection.
If an M12 quick connector is not available for connection of the PowerDeck platform to the IND570,
the connection wiring between the IND570 POWERCELL terminal and the PowerDeck platform can
be handled in the same way as the PowerMount cabling. Please refer to section 2.4.5.8 for further
instructions.
M12 connectors are not certified for use on IND570xx POWERCELL terminal. The IND570xx
POWERCELL terminal is equipped with a cable gland. Prepare the cable and gland as indicated in
section 2.4.5.8 for Harsh enclosure and section 2.4.5.9 for Panel enclosure.
Figure 2-89: IND570 PowerDeck Connector (left) and IND570xx POWERCELL Connector (right)
2-44 METTLER TOLEDO IND570 Terminal Installation Manual 30205319 | 11 | 07/2019