GB
- Raise the display unit a little and remove the trim (Fig.8 pos.E).
- An operator lifts the display unit with a crowbar under the left-side tube (with the longer display units the
operation must be repeated with the right-side tube).
- Another operator moves the trim.
- Remove the plinth of the display unit (Fig.9 pos.A)
by loosening the screws and lifting the plinth.
- Remove the screws (Fig.10 pos.B) that secure the
rear trim to the frame of the display unit.
E
46
Fig.8
Fig.9
A
Fig.10
B