Assembly Front Glass - ifi SAM80 Manual Para El Uso Y Mantenimiento

2.6.5.b ASSEMBLY FRONT GLASS
of all types of display unit .
-For the terminal version, the front glasses are two
(one long and one short) . In this case the procedure
shall be performed twice .
– Finish off the front glass panel (B) using the rubber
seal (C) (Fig.17).
- Connect the main cable of the front glass in
1125mm windows and short terminal the two
electrical wires in the 1625 and 2125mm windows
and long terminal.
.– Insert the front glass panel into the gripper (D)
(Fig.18).
– Insert the gib (A) (Fig.19).
Fig.17
B
Fig.18
D
Fig.19
A
57
GB
C