GB
2.6.3.b HEATED SHELF (OPTIONAL)
NOTE: the heated shelf can only be
installed in the upper position.
- Remove the seal A covering the slot in the centre
- Take the connection cable B from the Heated Shelf
Kit and remove the connector block C.
- Insert the cable into the hole and slot on the shelf
- Feed the cable B and press it tightly against the
bracket, then pass it through into the lighting unit
(Fig.14f).
order to insert the cable.
- Put the seal A back onto the shelf bracket.
- Re-assemble the connector block C.
C
B
B
B
52
Fig.14e
B
A
Fig.14f
A
C
B