GOLDONI Quasar Serie Manejo Y Cuidado página 62

20.Avoid tight steering angles when towed implements are mounted and the
drive shaft is under strain since the coupling could be damaged.
21.Do not use the 3-point linkage on the lift as a hitch.
22.Regulate the hitch in its lowest possible positions to prevent the machine
from rearing.
23.During transhipments with equipment coupled on the 3-point linkage, tension
the chains and keep the lift raised.
24.The operator must check if every part of the tractor and, especially the
safety devices, are in good working condition and perform to specs. They
should be kept in perform working condition. If you note any defects or
malfunctioning, fix or repair them in good time. If necessary contact your
nearest Assistance Centre. Failure to observe these instructions will release
the manufacturer from all liability.
62