Cab And Roll Bar; Safety Frame (Roll-Bar Or Rops); Safety Belts (Where Applicable) - GOLDONI Quasar Serie Manejo Y Cuidado

Idiomas disponibles

5 CAB AND ROLL BAR

(Optional)

- For Italy:

If the cab or roll bar are installed after the tractor has been purchased, the

Customer should ask our Sales Division for the Approval Certificates.

With these documents and the tractor's Log Book, apply to the requisite Ministry

of Transport Test Centre where the Log Book will be updated or replaced.

- For other countries

If the cab or roll bar is installed after the tractor was purchased, the Customer

should contact the requisite Certifying Authority for information on what is

required to update the tractor's Log Book.

The machine is equipped with a folding safety frame. Always keep the safety

frame mounted in its correct vertical position when you are working. It is

absolutely forbidden to modify the structural components of this type of

construction by welding on additional parts, drilling holes, grinding, etc. Failure to

comply with these recommendations could impair the rigidity of the frame itself.

The safety frame is subjected to considerable stress if the tractor tips over. If this

happens, the structural components must be replaced if they have been bent,

deformed or damaged in some other way.

When in the horizontal position, the safety frame will provide no

protection if the tractor tips up. When working in these conditions,

it is of the utmost importance for the operator to pay the greatest attention

when manoeuvring the machine.

Wear the safety belts when you use the machine with the safety frame (roll-bar

or ROPS) to reduce the risk of accidents if the tractor tips up.

Do not wear the seat belt if you use the machine with the roll-bar

in the horizontal position.

Tabla de Contenido