Attaching The Enclosure Lid Before Mounting The Dc- Connection Unit - SMA STP50-40-COM-RM-10 Serie Instrucciones Para El Montaje

6 Attaching the enclosure lid before mounting the DC-
Connection Unit
6 Attaching the enclosure lid before mounting the DC-
Connection Unit
1. Ensure that all connections for the replaced assembly have been made correctly.
2. Ensure that the DC load-break switch is turned to position O.
3. Position the enclosure lid of the DC-Connection Unit
on the DC-Connection Unit and first tighten the
upper-left and lower-right screws, and then the
remaining screws crosswise (TX 25, torque: 6 Nm).
4. Commission the inverter (see inverter manual at www.SMA-Solar.com).
14 STP50-40-COM-RM-xx-10
SMA Solar Technology AG
10x
10x
1
2
Replacement Manual