Scaleor Overview; General Information - NDS ScaleOR Manual De Uso

ScaleOR Overview

The ScaleOR accepts 1 of following 4 input modules:
DVI-D
SDI
VGA
S-Video / Composite
The drawing on page 3 shows location of the fixed output connectors and the input module.
The output mode (resolution) may be selected using the DIP switches located on the bottom of the
ScaleOR (see Output Mode Switch Settings

General Information

Installation:
ScaleOR units may be stacked on a equipment carrier, a surgical cart or mounted in a standard 19" rack.
Ensure that the air vents are not blocked.
Power Supply:
The provided power supply, Ault and SL Power Electronic Corp Model: MENB1030A1200C02 12VDC,
includes 4 interchangeable wall plug adapters. Drawings of the power supply, its adapters, and adapter
installation information are on page 5.
Compatible Displays:
1. HD displays with a
2. HD displays with HD-SDI
3. HD displays with Fiber Optic
Control Options:
The ScaleOR may be controlled from:
1. The keypad on the front of the ScaleOR. Using the keypad requires that the ScaleOR be connected to
a display.
2. A PC via the ND-OS port. See
The NDS Unified Serial Commands
for the ScaleOR. Please contact your
table on page 4).
DVI input.
or 3G-SDI input.
input. Note: The ScaleOR's
Serial Port Setup and Test
(P/N 60A0156) document contains a complete set of serial commands
NDS sales representative
Fiber Optic output is an optional feature.
on page 16.
for details.
2