Random Play); Scanning Programs; Searching From Cd Text; File/Folder Name Search (Concerning Mp3/Wma) - Alpine DVA-9965 Manual De Operación

M.I.X. (Random Play)
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under M.I.X. to select
the Random Play mode.
The tracks (files) will be played back in random
sequence.
CD mode:
↓
M.I.X. : The tracks are played back in
random sequence.
↓
* 3
M.I.X. : The tracks on all the CDs in the current
magazine will be played back in the
random sequence.
↓
* 4
(off)
3
* When a CD changer equipped with the All M.I.X. function is
connected.
4
* When selecting the internal disc mode, RPT
• If M.I.X. is set to ON during RPT
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode:
↓
M.I.X. : Only files in a folder are played back in
random sequence.
↓
M.I.X. : Files are played back in random sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played
back in random sequence, and playback
shifts to the next disc.
↓
5
*
(off)
5
* When selecting the internal disc mode, RPT
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
is illuminated.
(REPEAT ALL) play in CD
is illuminated.

Scanning Programs

1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under SCAN to select
the Scan mode.
The first 10 seconds of each of track (file) will be played
back in succession.
3
If the desired song is found, perform steps 1 and 2
to stop scanning.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.

Searching from CD Text

Tracks can be searched and played by using the CD text on the disc.
In the case of discs and changers that do not support text, searches can
be made by using the track numbers.
1
Press during play.
This will set the search mode.
2
Select the desired track by sliding your finger on
the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Text of the
desired Track.
This will play the selected track.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or the search mode will be canceled when an operation
has not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
• Tracks are skipped continuously by touching and holding either
side of the GlideTouch bar.
File/Folder Name Search (concerning MP3/
WMA)
You can display and search the folder and file name while listening to
the file currently being played back.
1
Press in MP3/WMA mode.
2
Within 10 seconds, select the Folder search mode
or File search mode by sliding your finger on the
GlideTouch bar to the left or right.
Press the GlideTouch bar under the desired
search mode.
Folder Name Search mode ↔ File Name Search mode
Folder Name Search mode
The desired folder is searched from all folders in a disc.
File Name Search mode
File is searched from all files in a disc or folder that is selected
by folder search.
Continued
13
-EN