Custom Setup; Custom Setup Operation; Setting The Cd Play Mode; Setting The Video Cd Play Mode - Alpine DVA-9965 Manual De Operación

Custom Setup

RETURN
SETUP

Custom Setup Operation

• Custom Setup Operation is performed by the remote control unit.
The following 5 steps are common to each of the Custom
Setup settings. Refer to the specific section for details.
1
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
S E T UP
L A N G U A G E S
T V S C R E E N 1 6 : 9 ( W I D E )
C O U N T R Y C O D E U S – 8 5 8 3
P A R E N T A L O F F
D I G I T A L O U T
C U S T O M S E T U P
2
Press 8 or 9 to select "CUSTOM SETUP", then
press ENT.
3
Press 8 or 9 to select your desired setting item,
then press ENT.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE /
DOWNMIX MODE
S E T UP
C U S T O M S E T U P
C D P L A Y M O D E C D - D A
V C D P L A Y M O D E P B C
P A U S E M O D E A U T O
D O W N M I X M O D E S U R R O U
4
Press 8 or 9 to change the setting, then press
ENT.
8
ENT.
9
O N
N D
5
Press RETURN repeatedly until the SETUP mode
is deactivated.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle's
battery is disconnected, the settings will be cleared and will return
to the factory settings.

Setting the CD Play Mode

The unit can be set to play only the audio data or only the MP3/WMA
files on discs containing both audio data and MP3/WMA data.
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESSED AUDIO
CD-DA:
COMPRESSED AUDIO: Only MP3/WMA data can be
The initial setting at the factory is CD-DA.
• If a disc has already been inserted, perform the setting after you
remove the disc.
• The setting cannot be carried out if an MP3 compatible changer is
used.

Setting the Video CD Play Mode

When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.

Setting the Pause Mode

In pause mode, screen blurring may occur. To overcome this, set
AUTO/FIELD/FRAME accordingly.
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to
FIELD or FRAME.
The initial setting at the factory is AUTO.

Setting the Downmix Mode

This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO:
SURROUND ENCODED: Dolby surround compatible
The initial setting at the factory is SURROUND ENCODED.
Only CD data can be played
back.
played back.
Stereo Downmix
Downmix
35
-EN