Glidetouch Bar Operation; Sound Setting; Adjusting Balance (Between Left And Right)/Fader (Between Front And Rear)/Defeat - Alpine DVA-9965 Manual De Operación

GlideTouch bar Operation

The GlideTouch bar controls the same functions as the unit buttons
and remote control.
1
Press FUNC. then select the desired mode.
Source select mode →
Audio function mode 1* (;, :, ENT., etc.) →
Audio function mode 2 (AUDIO, RPT, etc.) →
Source operation mode (g, f , etc.) →
Source select mode
* DVD mode only.
2
The function guide of the selected mode is
displayed.
3
Press the position on the GlideTouch bar which
corresponds to the function guide in the display.
Source Operation Mode
<DVD/Video CD mode>
L Stopping Playback (PRE-STOP)
L
Stopping Playback
(/) Fast-forward/Fast-reverse
g/f Find the Beginning of Chapters or Tracks
: Playback
J Still (pause)
g/f Forward/Reverse frame-by-frame playback
(/) Slow Motion Playback
Audio Function Mode
<DVD mode>
;/:/8/9/ Selection button when the menu display is
ENT. indicated.
Return to the previous display
RTN
(Depending on the disc, it may not be possible to
return to the previous display.)
C
FUNC. Press FUNC. to change.
B
TOP.M Recall the top menu display
MENU Recall the menu display
AUDIO Switching the Audio Tracks
SUBT. Switching the Subtitles
ANGLE Change the angle
RPT Chapter/Title repeat playback
<Video CD mode>
AUDIO Change audio output
RPT Chapter/Track repeat playback
PBC Set Video CD playback mode
RTN Return to the previous display
(Depending on the disc, it may not be possible to
return to the previous display.)
20
-EN

Sound Setting

SOURCE/
POWER
g MENU
Adjusting Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat
1
pgae17
Press the Rotary encoder (MODE) repeatedly to
page17 choose the desired mode.
page17
Each press changes the mode as follows:
page17
SUBWOOFER*
page17
VOLUME → SUBWOOFER*
page17
Subwoofer : 0 ~ +15
page17
Balance : L15 ~ R15
page17
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is switched NORMAL
page16 (PHASE 0°) or REVERS (PHASE 180°).
• If the Rotary encoder (MODE) is not pressed within 5 seconds
after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER
mode, the unit automatically returns to normal mode.
• If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY,
you cannot adjust the FADER mode.
1
* When the subwoofer mode is set to OFF, its level and phase cannot
be adjusted.
page16
2
Turn the Rotary encoder (MODE) until the
page16
desired sound is obtained in each mode.
page18
By setting Defeat ON, previously adjusted settings of EQ
page19
will return to the factory defaults and MX is turned off.
page18
• If an external audio processor is connected, refer to "External
page18
Audio Processor (Optional)" (pages 45 to 53)
page18
page18
page35
BAND
Rotary encoder (MODE)
f FUNC. GlideTouch bar
→ BALANCE → FADER → DEFEAT →
1
1