External Audio Processor (Optional); Adjustment Procedure For Dolby Surround - Alpine DVA-9965 Manual De Operación

External Audio Processor
(Optional)
SOURCE/
POWER
BAND
MENU
When an external audio processor is connected to this unit, you
can operate it from this unit. Some audio processors may not be
operated. When PXA-H900 is connected, some of the operations may
not be performed from this unit. In this case, operate them in the
connected product. Explanations below is the case when PXA-H700
or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting "Setting the Speakers", "Setting Bass Sound Control",
and "Graphic Equalizer Adjustments" are not available if the
MRA-D550 is connected. Additionally, if the MRA-F350 is
connected, the following setting "Setting the MX mode" is not
available. Also, the setting content differs between the PXA-H700
and PXA-H701.
• This unit cannot be connected to the PXA-H510.
• The unit has no Bass Focus function.
• If no operation is performed for approximately 15 seconds when
setting the external audio processor, the A.PROC mode is canceled,
and the normal mode returns.
Rotary encoder
GlideTouch bar

Adjustment Procedure for Dolby Surround

Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
Speaker Setup (page 49)
1
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 50)
2
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
3
(page 50)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
Adjusting the acoustic image (page 51)
4
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
Achieving powerful high volume sound
5
(page 51)
(Achieving energetic sound with even greater power,
like the sound in a movie theatre)
Adjusting the DVD Level (page 51)
6
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing settings in the Memory (page 53)
7
(Storing all the settings and adjustments made on the
DVA-9965 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
B
B
B
B
B
B
45
-EN