Ikegami IPD-Q38 Manual De Instrucciones página 20

⑥ Click "Use the following IP address" and input the address.
* In this process, it is recommended to take a note of the original IP address of PC for later
use, as the address shall go back the original address after setting the PTZ camera IP
address.
Set the IP address at "192.168.1 ○". In ○, number should be other than 100.
And set the subnet mask at "255.255.255.0".
The initial IP addresses of Ikegami's network-compatible
products are as follows.
Network camera/encoder : 192.168.1.100
Network decorder
Network recorder
Initial Setting (Factory Setting)
URL : http://192.168.1.100/
User name : admin
Password : 1
IP address : 192.168.1.100
Subnet mask : 255.255.255.0
Gateway : 192.168.1.1
MTU : 1454
DNS server : 192.168.1.1
HTTP port : 80
HTTPS port : 443
REFERENCE
: 192.168.1.150
: 192.168.1.200
PC Operating Environment
Following environment is recommended
* Microsoft Windows XP
* Internet Explorer 6.0
* Intel Pentium 4, 2.0GHz or higher
* More than 256MB or greater memory
(More than 512MB is recommendable)
E-16