Descargar Imprimir esta página

Operating Conditions; Contact Support - Impecca ITAC-08KS Manual Del Usuario

Ocultar thumbs Ver también para ITAC-08KS:

Publicidad

Idiomas disponibles

Idiomas disponibles

TRoUBlesHooTInG TIps:
Problem
Water dripping
OUTSIDE when
unit is cooling.
Remote Sensing
Deactivating
Prematurely
(some models)
Room too cold
MACHIne soUnDs/noIses:
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
Sound of Rushing Air
being moved by the fan
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
Gurgle/Hiss
passing through evaporator
during normal operation.
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
NOTE:This air conditioner is designed to be operated under condition as follows:

opeRATInG ConDITIons:

Cooling operation
NOTE:This air conditioner is designed to be operated under condition as follows:
Cooling operation
Heating operation
Heating operation
Note: Performance may be reduced outside of these operating temperatures.
Note: Performance may be reduced outside of these operating temperatures.
AIR CONDITIONER FEATURES
AIR CONDITIONER FEATURES

ConTACT sUppoRT:

ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panels as shown below and all
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Impecca customer support can be contacted in the following methods:
its functions, then follow the symbol for the functions you desire. The unit can be controlled
by the unit control alone or with the remote.
• Online 24/7: www .impeccausa .com
Before you begin, thoroughly familiarize yourself with the control panels as shown below and all
its functions, then follow the symbol for the functions you desire. The unit can be controlled
• By phone:
by the unit control alone or with the remote.
S
Solution
Unit removing large quantity of moisture from humid room. This is normal during
excessively humid days.
Remote control not located within range. Place remote control within 20 feet & 180 ,
radius of the front of the unit.
Remote control signal obstructed. Remove obstruction.
Set temperature too low. Increase set temperature.
NORMAL SOUNDS
NORMAL SOUNDS
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
High Pitched Chatter
during the cooling cycle.
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
18-43 C(T
Outdoor temp:
17-32 C(T
Indoor temp:
Outdoor temp:
18-43 C(T
-5-24 C(T
Outdoor temp:
17-32 C(T
Indoor temp:
0 -27 C(T
Indoor temp:
Outdoor temp:
-5-24 C(T
0 -27 C(T
Indoor temp:
+1 888 .918 .3456
UNIT CONTROL
UNIT CONTROL
Temp
Temp
Environment)
21-52 C(T
O
1
17-32 C(T
Environment)
O
1
Environment)
21-52 C(T
O
-7-24 C(T
Environment)
O
1
1
17-32 C(T
Environment)
O
1
0-30 C(T
Environment)
O
1
-7-24 C(T
Environment)
O
1
0-30 C(T
Environment)
O
1
20
23
Vibration
Unit may vibrate and make noise
because of poor wall or window
Vibration
construction or incorrect installation.
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
Pinging or Switching
pinging or switching sounds.
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Environment)
O
3
Environment)
O
3
Environment)
O
Environment)
O
3
3
Environment)
O
3
Environment)
O
3
Environment)
O
3
Environment)
O
3
Temp
S
Temp

Publicidad

loading