Introduction
Thank you for purchasing our tiller.
This manual contains information on operation
and maintenance of the tiller, which is based
on the most recent product information
available at the time of approval for printing.
We reserve the right to make amendments
without advance notice and without incurring
any obligation for sequences.
This manual should be considered a
permanent part of the tiller, and remain with it
if it is resold.
1. SAFETY INFORMATION
Safety is very important for you and others. We
have written down important safety information
in both manual and machine. Please read it
carefully.
Safety information gives you warning that you
may bring potential danger to yourself and
others. The key words with "!" are put before
every piece of information. These words are
"danger, warning, attention" .
DANGER - if you don't operate follow those
indicated in the manual, serious injures, even
death will be caused.
WARNING - if you don't operate follow those
indicated in the manual, device damage and
injures will be caused.
ATTENTION - if you don't operate follow those
indicated in the manual, device damage and
injures may be caused.
Damage prevention
You can see other important information
marked with "ATTENTION" .
ATTENTION: If you don't operate as those
indicated in the manual, device damage will
be caused.
Safety prevention
If mini tiller is operated follow those indicated
in the manual, it will work safely and reliably.
Before operating the mini tiller, please read this
manual carefully. Otherwise, injures and device
damage will be caused.
Owner´s manual
Safety prevention
ATTENTION
• When starting engine, please turn gear lever
to neutral position.
• When the machine is working, please pay
attention to safety!
• Be careful about the rotary blades, because
they may hurt you!
• Fuel and lube oil must be clear.
• Before shifting the gear , you must disconnect
the clutch. When holding the backshift bar,
the gear lever must be put in the neutral
position.
• Gasoline is flammable, you must pay
attention to fire and exploding.
As model is always improved, photos or
illustrations may have difference comparing the
actual machine.
WARNING
Exhaust gas contains poisonous carbon
monoxide. Never run the tiller in enclosed
areas. Be sure to provide adequate ventilation.
CO
When installing, ventilated protection is to be
2
observed
The rotating parts are sharp and running at
high speed. Accidental contact can cause
serious injury.
Keep your hands and feet away from the parts
while engine is running .
Stop the engine and disengage the tines clutch
before inspection or maintenance of the tines.
Disconnect the spark plug cap to prevent any
possibility of accidental starting .Wear heavy
gloves to protect your hands from the tines
when clearing the tines or when inspecting or
replacing the tines.
Operator Responsibility
•
Keep the tiller in good operating condition.
Operating a tiller in poor or questionable
condition could result in serious injury.
• Be sure all safety devices are in working
order and warning labels are in place. These
items are installed for your safety.
• Be sure the safety covers (Fan cover, recoil
starter cover ) are in place.
• Know how to stop the engine and blades
quickly in case of emergency. Understand the
use of all controls. order and warning labels
English
27